Skip to content

GloriaFood closes on 30 April 2027. Switch to Gofood and get Pro free for 3 months. See the offer

Gofood
How-to guide

Faint or streaky receipts: clean the print head

Faint print or white lines on a thermal printer usually mean a dirty print head. Clean it with alcohol on a cotton bud, about every 3 months.

If the kitchen is squinting at tickets, or there's a white line down every receipt, the print head is usually dirty. Paper dust and grease from a busy counter build up on it. Epson recommends cleaning it about every 3 months.

You need a cotton bud and some isopropyl alcohol or ethanol. Five minutes, no tools.

Clean the head and roller

  1. Turn the printer off. The head gets very hot during printing, so give it a few minutes to cool.
  2. Open the roll paper cover.
  3. Wipe the thermal head (the strip the paper presses against) with a cotton bud dipped in alcohol.
  4. Wipe the platen roller (the rubber roller) with a cotton bud lightly dampened with water. Paper dust on the roller can stop the paper feeding properly.
  5. Let it all dry completely before you turn the printer on.

Don't touch the head with your fingers or anything hard. A scratch on it leaves a white line for good.

Cleaning the outside

Turn it off and wipe the case with a dry or damp cloth. Don't use alcohol, thinners or other solvents on the case, as they damage the plastic and rubber.

Still faint after cleaning?

Try a roll from a different box. Old or cheap thermal paper prints pale, and paper stored somewhere warm fades. If a new roll is still faint, open the chat on this page and we'll help.

More how-to guides

← All device support